Nondestructive control of composite quality. TSNIISM's Products

TSNIISM's Products

NONDESTRUCTIVE CONTROL AND TECHNICAL DIAGNOSIS OP POLYMER COMPOSITE PRODUCT QUALITY

We offer means and techniques which ensure the following:

Detection of delaminations and. unglued areas with opening over 0.2 mm between rubber, metal and composite in the flange zone of polymer composite pressure vessels.
Detection of unglued areas with opening over 0.5 mm in sandwich walls (fiberglass - polyurethane foam - fiberglass) of large-scaled containers.
Control and position determination for defects having an area from 30 mm x 30 mm, and opening over 0.2 nm in walls of polymer composite high-pressure cylinders made by winding.
Measurement of dielectric coating thickness in the range of 0.01 mm to 100 mm on ferromagnetic and nonferromagnetic surfaces.
Measurement of layer thickness in two-layer polymer composite structure over the range of 1 mm to 20 mm.
Measurement of thickness of ceramic coating applied on heat-resistant carbon-carbon products.
Detection of cavities from 30 mm in diameter, and control of physical and mechanical characteristics of foam blocks up to 60 mm thick.

Experienced specialists of the nondestructive control department will help you to design and make as follows:

Means for small mechanization and automation of nondestructive test operations.
Ultrasonic converters over the frequence range of 40 kHz to 800 kHz for hand and mechanized control.
Hardware components and software for computer processing the results of X-ray control.

For more details please contact us at:

Adress: Khotkovo, Moscow region, 141371, Russia

Phone: (095) 584 - 55 - 11

Fax: (09654) 3 - 13 - 13

E-mail: tsniism@dataforce.net