NII Polymerov

V.A. Kargin Polymer Chemistry And Technology Research Institute
With A Pilot-Production Plant

	ABOUT
	History Geographical position International contacts Scientific potential Fields of activity Management Dealers

	PRODUCTION


		Adhesives, sealants, compounds

ANATHERM-114

Anaerobic adhesive-sealant Anatherm-114 is designed for fixing, locking and sealing detachable threaded and flat joints. Anatherm -114 has a higher torque break away compared to torque unscrewing and belongs to adhesives with a controlled strength .

Anatherm -114 is a thixotropic composition with a long shelf life and ability of quick curing in gaps between metal surfaces.

TECHNICAL CHARACTERISTICS

1	Brookfield dynamic viscosity at 10 rpm , mPa s	3000-6000
2	Time to achieve manual strength on threads of constructional steel M 10 x 1.5; min	3-8
3	Break away torque on threads of constructional steel M10xl.5; N*m in 3 hours in 24 hours	== no less 8 no less 12
4	Unscrewing torque on threads of constructional steel M10 xl.5; N*m	3-12
5	Break away/unscrewing torque after ageing of threaded connections for 1000 hours, N*m - at 150│C - in tosol A-40 at 90 oC - in machine oil M63G at 125│C - in braking fluid at 90 │C	14/12 15/8 10/4 12/6

Anatherm-114 is a quick-setting adhesive-sealant that allows to use it in in-line assembly of various units and articles. Finished product is supplied in polyethylene tubes.

Warranted shelf life - I year.

TU-2257-301 -00208947-98 Hygienic certificate # 52.NTz.1.225.P.2286.11.98 of November 23, 1998

ANATHERM - 501 M

Anaerobic sealing gasket Anatherm-501M is designed for sealing fixed detachable joints (flange, flat, threaded)
and replacing currently used silicone based rubberized asbestos fabric, carton and liquid gaskets.

Anatherm -501 M is a highly-viscous thixotropic composition remaining in the initial state without changing its properties and quickly curing in gaps between metal surfaces.

TECHNICAL CHARACTERISTICS

Brookfield dynamic viscosity at 2 rpm , mPa*s , no less

50000-300000

Tensile strength, mPa

in 24 hours, no more
- in 3 hours, no less

====

Sealing ability under pressure, mPa, no less

on flange joints
on threaded joints

Anatherm-501 M works in various aggressive media, including machine oil, diesel fuel, petrol, ethylene glycol, water at temperature -60 │C to + 150│C.

Anatherm -501 Mis a quick-setting sealant , used without activator. A high curing rate of the anaerobic gasket, including in articles of aluminum alloys, allows to use it in in-line assembly of engines and other automotive units. Finished product is supplied in polyethylene tubes, flasks and cans.

Warranted shelf life - I year.

TU-6-02-96-90. Hygienic certificate # 52.NTz.1.225.P.2286.11.98 of November 23, 1998

PHYSICAL AND TECHNICAL CHARACTERISTICS OF ANAEROBIC MATERIALS

1. ANAEROBIC ADHESIVES FOR PERMANENT THREADED JOINTS

GRADE	UG-7	UG-8	UG-9	UG-10	AN-111	AN-112	AN-6	AN-6V	AN-117VM
THREAD MAX.	M 12	M80	M20	M20	M36	M 12	M80	M36	M36
TEMPERATURE,│C	- 60 - + 150					-60 -+175	-60 - +150		-60 - +150

2. ANAEROBIC ADHESIVES FOR DETACHABLE THREADED JOINTS

GRADE	UG-6	UG-11	UG-2M	AN-5MD	AN-8K	AN-17M	AN-17	AN-18	AN-6K
THREAD MAX.	M20	M12	M20	M20	M36	M36	M36	M36	M36
TEMPERATURE,│C	- 60 - +1 50

3. ANAEROBIC ADHESIVES FOR FIT JOINTS (SLEEVES, BEARINGS AND ETC.)

GRADE	UG-7	UG-8	UG-9	AN-103	AN-111	AN-112	AN-6B
THREAD MAX.	0.1	0.35	0.2	0.2	0.25	0.15	0.3
TEMPERATURE,│C	- 60 - + 150			-60 - +120	-60 - +150	-60 - +175	-60 - +150

4. ANAEROBIC ADHESIVES FOR FLANGE JOINTS AND PIPE THREADS

GRADE	AN-501	AN-8	AN-8K	AN-17	AN-17M	AN-18
THREAD MAX.	0.2	0.15	0.15	0.1	0.1	0.1
TEMPERATURE,│C	- 60 - +150

5. ACRYLIC ADHESIVES FOR STRUCTURAL BONDING

GRADE	AN-103	AN-111	AN-105AB	AN-106AB	AN-110AB	KV-401
INITIAL SETTING TIME	15-20 min. 10-20 sec. (with activator)	5-10 min.	2-3 min.	2-3 min.	15-90 sec.	10-20 sec. UV-radiation
TENSILE STRENGTH, MPa	30	30	30	35	30	5 metal to glass
TEMPERATURE,│C	-60 - +120	-60 -+150	-60 - +150	-60 - +175	-60 - +150	-40 - +80