îéé ðÏÌÉÍÅÒÏ×

V.A. Kargin Polymer Chemistry And Technology Research Institute With A Pilot-Production Plant
(NII Polymerov)

ANATHERM -114

Anaerobic adhesive-sealant Anatherm-114 is designed for fixing, locking and sealing detachable threaded and flat joints. Anatherm -114 has a higher torque break away compared to torque unscrewing and belongs to adhesives with a controlled strength .

Anatherm -114 is a thixotropic composition with a long shelf life and ability of quick curing in gaps between metal surfaces.

TECHNICAL CHARACTERISTICS

1

Brookfield dynamic viscosity at 10 rpm , mPa s

3000-6000

2

Time to achieve manual strength on threads of constructional steel M 10 x 1.5; min

3-8

3

Break away torque on threads of constructional steel M10xl.5; N*m

  • in 3 hours

  • in 24 hours

  

  • no less 8

  • no less 12

4

Unscrewing torque on threads of constructional steel M10 xl.5; N*m

3-12

5

Break away/unscrewing torque after ageing of threaded connections for 1000 hours, N*m

  • - at 150°C

  • - in tosol A-40 at 90 oC

  • - in machine oil M63G at 125°C

  • - in braking fluid at 90 °C

 

  • 14/12

  • 15/8

  • 10/4

  • 12/6

Anatherm-114 is a quick-setting adhesive-sealant that allows to use it in in-line assembly of various units and articles. Finished product is supplied in polyethylene tubes.

Warranted shelf life - I year.

TU-2257-301 -00208947-98 Hygienic certificate # 52.NTz.1.225.P.2286.11.98 of November 23, 1998

ANATHERM - 501 M

Anaerobic sealing gasket Anatherm-501M is designed for sealing fixed detachable joints (flange, flat, threaded)
and replacing currently used silicone based rubberized asbestos fabric, carton and liquid gaskets.

Anatherm -501 M is a highly-viscous thixotropic composition remaining in the initial state without changing its properties and quickly curing in gaps between metal surfaces.

TECHNICAL CHARACTERISTICS

1

Brookfield dynamic viscosity at 2 rpm , mPa*s , no less

50000-300000

2

Tensile strength, mPa

  • in 24 hours, no more

  • - in 3 hours, no less

    

  • 10

  • 3

3

Sealing ability under pressure, mPa, no less

  • on flange joints

  • on threaded joints

  

  • 35

  • 35

Anatherm-501 M works in various aggressive media, including machine oil, diesel fuel, petrol, ethylene glycol, water at temperature -60 °C to + 150°C.

Anatherm -501 Mis a quick-setting sealant , used without activator. A high curing rate of the anaerobic gasket, including in articles of aluminum alloys, allows to use it in in-line assembly of engines and other automotive units. Finished product is supplied in polyethylene tubes, flasks and cans.

Warranted shelf life - I year.

TU-6-02-96-90. Hygienic certificate # 52.NTz.1.225.P.2286.11.98 of November 23, 1998

PHYSICAL AND TECHNICAL CHARACTERISTICS OF ANAEROBIC MATERIALS

1. ANAEROBIC ADHESIVES FOR PERMANENT THREADED JOINTS

GRADE UG-7 UG-8 UG-9 UG-10 AN-111 AN-112 AN-6 AN-6V AN-117VM
THREAD MAX. M 12 M80 M20 M20 M36 M 12 M80 M36 M36
TEMPERATURE,°C

- 60 - + 150

 -60 -+175 -60 - +150 -60 - +150

2. ANAEROBIC ADHESIVES FOR DETACHABLE THREADED JOINTS

GRADE UG-6 UG-11 UG-2M AN-5MD AN-8K AN-17M AN-17 AN-18 AN-6K
THREAD MAX. M20 M12 M20 M20 M36 M36 M36 M36 M36
TEMPERATURE,°C

- 60 - +1 50

3. ANAEROBIC ADHESIVES FOR FIT JOINTS (SLEEVES, BEARINGS AND ETC.)

GRADE UG-7 UG-8 UG-9 AN-103 AN-111 AN-112 AN-6B
THREAD MAX. 0.1 0.35 0.2 0.2 0.25 0.15 0.3
TEMPERATURE,°C - 60 - + 150 -60 - +120 -60 - +150 -60 - +175 -60 - +150

4. ANAEROBIC ADHESIVES FOR FLANGE JOINTS AND PIPE THREADS

GRADE AN-501 AN-8 AN-8K AN-17 AN-17M AN-18
THREAD MAX. 0.2 0.15 0.15 0.1 0.1 0.1
TEMPERATURE,°C

- 60 - +150

5. ACRYLIC ADHESIVES FOR STRUCTURAL BONDING

GRADE

AN-103

AN-111

AN-105AB

AN-106AB

AN-110AB

KV-401

INITIAL SETTING TIME

15-20 min.
10-20 sec.
(with activator)

5-10 min.

2-3 min.

2-3 min.

15-90 sec.

10-20 sec.
UV-radiation

TENSILE STRENGTH, MPa

30

30

30

35

30

5
metal to glass

TEMPERATURE,°C

-60 - +120

-60 -+150

-60 - +150

-60 - +175

-60 - +150

-40 - +80

6. QUICK SETTING CYANOACRYLIC ADHESIVES

GRADE

TK-200

TK-201

MIG

KM-200

TK-300

INITIAL SETTING TIME, min. no more

1

1

3

1

1

TEMPERATURE,°C

+125

+125

+100

+100

+200

7. IMPREGNATING COMPOSITIONS TO ELIMINATE LEAKS IN CASTING, ROLLED PRODUCTS, WELDS, CERMET MATERIALS

GRADE

*PK-80

AN-1

AN-IU

DN-I

AN-50U

AN-260

GAP MAX., MM

0.1

0.1

0.1

0.15

0.1

0.15

TEMPERATURE,°C

-60 - +150

-60 - +200

NOTE

*CURED AT 90 -95 °C

More detailed information is available in V. A. Kargin Polymer Chemistry and Technology Research Institute

ëÏÎÔÁËÔÙ îéé ðÏÌÉÍÅÒÏ×

Address:

Russia, 606000, Dzerzhinsk Nizhny Novgorod region  

Telefons:
 

Fax: 

(8313) 25-50-00, 27-11-34
Sales department: (8313) 27-10-63, 27-10-52

(8313) 27-10-81

http:// 

www.advtech.ru/Nipolymer/nipolymer1.htm

E-mail:

niip@kis.ru
orr@nts.ru
niip@bk.ru

To the page of enterprise >>